Drum drilling tool,
alignment jig,
for drilling nipple threads
Part Number: TOOL-DRUM
Availability: In Stock
Price: $15.99
Order Quantity:
Install a percussion powder drum on your new rifle barrel, and be assured of perfect alignment. Using this drilling jig is very quick and easy.

No file fitting is required to index the nipple to correctly engage the hammer. Never use a washer or shim under your powder drum. Install one of our drums and use this tool to locate and install the nipple threads.

After your lock is correctly located, and fully inlet against the barrel's side flat, drill tap and install our un-drilled powder drum. Tighten it snugly against the barrel. Lower the hammer on your lock, and draw a line across the face of the drum, showing the proper nipple angle. Remove the barrel and drum assembly from your stock. Slip this tool over the drum. Align it with the line on your drum. Tighten the locking screw, and insert the drill bushing. Using your hand drill and your #3 drill bit, drill a connecting hole into the powder drums center channel. Remove the drill, bushing, and insert our 1/4-28 plug tap.

Using a tap wrench and thread cutting oil, thread the hole to accept our best #RST-S nipple with 1/4-28 threads. Finish with our bottom tap. Dismount the drill jig, and proof test your barrel and drum before use. Apply our #BC-CTL anti-seize grease to your nipple threads, to prevent galling or seizing, even after extended use.

NEVER remove a fitted and finished breech plug or powder drum. Removal risks permanent damage. Bore obstructions can more easily be removed using other methods.

Drum, nipple, tap drill, tap, and tap wrench are sold separately.
Adobe Reader required to view the files below.
Get Adobe Reader
page_135.pdf Last updated:4/25/2012 (112 KB) page_166.pdf Last updated:4/25/2012 (97 KB) page_173.pdf Last updated:4/25/2012 (104 KB)
page_179.pdf Last updated:4/25/2012 (118 KB) page_390.pdf Last updated:4/25/2012 (118 KB)
Choke Tube Lube,
anti-seize grease, 3/4 ounce tube,
by Birchwood Casey
Choke Tube Lube, anti-seize grease, 3/4 ounce tube, by Birchwood Casey
Part Number: BC-CTL
Availability: In Stock
Price: $9.99
Order Quantity:
drill bit, HSS, Number 3, .2130" diameter, tap drill for 1/4-28 thread
drill bit, HSS, Number 3, .2130" diameter, tap drill for 1/4-28 thread
Part Number: DRILL-3
Availability: In Stock
Price: $3.99
Order Quantity:
Powder drum, 7/16" diameter, 5/16-18 thread, not drilled for nipple, with lug for installation
Powder drum, 7/16" diameter, 5/16-18 thread, not drilled for nipple, with lug for installation
Part Number: DRUM-7-5-C-L
Availability: In Stock
Price: $4.29
Order Quantity:
Powder drum, 7/16" diameter, 5/16-18 thread, not drilled for nipple
Powder drum, 7/16" diameter, 5/16-18 thread, not drilled for nipple
Part Number: DRUM-7-5-C-N
Availability: In Stock
Price: $4.59
Order Quantity:
Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple, with lug for installation
Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple, with lug for installation
Part Number: DRUM-7-5-F-L
Availability: In Stock
Price: $4.29
Order Quantity:
Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple
Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple
Part Number: DRUM-7-5-F-N
Availability: In Stock
Price: $4.59
Order Quantity:
Powder drum, 7/16" diameter, 3/8-16 thread, not drilled for nipple, with lug for installation
Powder drum, 7/16" diameter, 3/8-16 thread, not drilled for nipple, with lug for installation
Part Number: DRUM-7-6-C-L
Availability: In Stock
Price: $4.29
Order Quantity:
Powder drum, 7/16" diameter, 3/8-16 thread, not drilled for nipple
Powder drum, 7/16" diameter, 3/8-16 thread, not drilled for nipple
Part Number: DRUM-7-6-C-N
Availability: In Stock
Price: $4.59
Order Quantity:
Powder drum, 7/16" diameter, 3/8-24 thread, not drilled for nipple, with lug for installation
Powder drum, 7/16" diameter, 3/8-24 thread, not drilled for nipple, with lug for installation
Part Number: DRUM-7-6-F-L
Availability: In Stock
Price: $4.29
Order Quantity:
Powder drum, 7/16" diameter, 3/8-24 thread, not drilled for nipple
Powder drum, 7/16" diameter, 3/8-24 thread, not drilled for nipple
Part Number: DRUM-7-6-F-N
Availability: In Stock
Price: $4.59
Order Quantity:
Powder drum, 1/2" diameter, 5/16-18 thread, not drilled for nipple, with lug for installation
Powder drum, 1/2" diameter, 5/16-18 thread, not drilled for nipple, with lug for installation
Part Number: DRUM-8-5-C-L
Availability: In Stock
Price: $4.29
Order Quantity:
Powder drum, 1/2" diameter, 5/16-18 thread, not drilled for nipple
Powder drum, 1/2" diameter, 5/16-18 thread, not drilled for nipple
Part Number: DRUM-8-5-C-N
Availability: In Stock
Price: $4.59
Order Quantity:
Powder drum, 1/2" diameter, 5/16-24 thread, not drilled for nipple, with lug for installation
Powder drum, 1/2" diameter, 5/16-24 thread, not drilled for nipple, with lug for installation
Part Number: DRUM-8-5-F-L
Availability: In Stock
Price: $4.29
Order Quantity:
Powder drum, 1/2" diameter, 5/16-24 thread, not drilled for nipple
Powder drum, 1/2" diameter, 5/16-24 thread, not drilled for nipple
Part Number: DRUM-8-5-F-N
Availability: In Stock
Price: $4.59
Order Quantity:
Powder drum, 1/2" diameter, 3/8-16 thread, not drilled for nipple, with lug for installation
Powder drum, 1/2" diameter, 3/8-16 thread, not drilled for nipple, with lug for installation
Part Number: DRUM-8-6-C-L
Availability: In Stock
Price: $4.29
Order Quantity:
Powder drum, 1/2" diameter, 3/8-16 thread, not drilled for nipple
Powder drum, 1/2" diameter, 3/8-16 thread, not drilled for nipple
Part Number: DRUM-8-6-C-N
Availability: In Stock
Price: $4.59
Order Quantity:
Powder drum, 1/2" diameter, 3/8-24 thread, not drilled for nipple, with lug for installation
Powder drum, 1/2" diameter, 3/8-24 thread, not drilled for nipple, with lug for installation
Part Number: DRUM-8-6-F-L
Availability: In Stock
Price: $4.29
Order Quantity:
Powder drum, 1/2" diameter, 3/8-24 thread, not drilled for nipple
Powder drum, 1/2" diameter, 3/8-24 thread, not drilled for nipple
Part Number: DRUM-8-6-F-N
Availability: In Stock
Price: $4.59
Order Quantity:
Nipple Wrench for Rifles & Shotguns,
slotted end for #11 nipple
Nipple Wrench for Rifles & Shotguns, slotted end for #11 nipple
Part Number: NW-120
Availability: In Stock
Price: $9.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Tap, high carbon steel, 1/4-28 thread, bottom tap
Tap, high carbon steel, 1/4-28 thread, bottom tap
Part Number: TAP-1/4-28-B
Availability: In Stock
Price: $3.99
Order Quantity:
Tap, high carbon steel, 1/4-28 thread, plug tap
Tap, high carbon steel, 1/4-28 thread, plug tap
Part Number: TAP-1/4-28-P
Availability: In Stock
Price: $3.99
Order Quantity:
Tap, high carbon steel, 3/8-16 thread, bottom tap
Tap, high carbon steel, 3/8-16 thread, bottom tap
Part Number: TAP-3/8-16-B
Availability: In Stock
Price: $5.99
Order Quantity:
Tap, high carbon steel, 3/8-16 thread, plug tap
Tap, high carbon steel, 3/8-16 thread, plug tap
Part Number: TAP-3/8-16-P
Availability: In Stock
Price: $5.99
Order Quantity:
Tap, high carbon steel, 3/8-16 thread, taper tap
Tap, high carbon steel, 3/8-16 thread, taper tap
Part Number: TAP-3/8-16-T
Availability: In Stock
Price: $5.99
Order Quantity:
Tap, high carbon steel, 3/8-24 thread, bottom tap
Tap, high carbon steel, 3/8-24 thread, bottom tap
Part Number: TAP-3/8-24-B
Availability: In Stock
Price: $5.99
Order Quantity:
Tap, high carbon steel, 3/8-24 thread, plug tap
Tap, high carbon steel, 3/8-24 thread, plug tap
Part Number: TAP-3/8-24-P
Availability: In Stock
Price: $5.99
Order Quantity:
Tap, high carbon steel, 3/8-24 thread, taper tap
Tap, high carbon steel, 3/8-24 thread, taper tap
Part Number: TAP-3/8-24-T
Availability: In Stock
Price: $5.99
Order Quantity:
Tap, high carbon steel, 5/16-18 thread, bottom tap
Tap, high carbon steel, 5/16-18 thread, bottom tap
Part Number: TAP-5/16-18-B
Availability: In Stock
Price: $4.99
Order Quantity:
Tap, high carbon steel, 5/16-18 thread, plug tap
Tap, high carbon steel, 5/16-18 thread, plug tap
Part Number: TAP-5/16-18-P
Availability: In Stock
Price: $4.99
Order Quantity:
Tap, high carbon steel, 5/16-18 thread, taper tap
Tap, high carbon steel, 5/16-18 thread, taper tap
Part Number: TAP-5/16-18-T
Availability: In Stock
Price: $4.99
Order Quantity:
Tap, high carbon steel, 5/16-24 thread, bottom tap
Tap, high carbon steel, 5/16-24 thread, bottom tap
Part Number: TAP-5/16-24-B
Availability: In Stock
Price: $4.99
Order Quantity:
Tap, high carbon steel, 5/16-24 thread, plug tap
Tap, high carbon steel, 5/16-24 thread, plug tap
Part Number: TAP-5/16-24-P
Availability: In Stock
Price: $4.99
Order Quantity:
Tap, high carbon steel, 5/16-24 thread, taper tap
Tap, high carbon steel, 5/16-24 thread, taper tap
Part Number: TAP-5/16-24-T
Availability: In Stock
Price: $4.99
Order Quantity:
Tap handle, accepts 1/4" to 1/2" diameter taps
Tap handle, accepts 1/4" to 1/2" diameter taps
Part Number: TAP-W-14
Availability: In Stock
Price: $11.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards