

Perhaps London’s most innovative lock and gun maker, Mr. Durs Egg immigrated from Switzerland, setting up shop in London, the world’s arms making center in his time.
Actually, “Durs” was a nickname, but Mr. Egg adopted it as his own. We are glad he did. Once you have used this lock, you will never confuse the “Durs Egg” with any other.
Use this lock on fine English rifles and fowlers of the 1770 to 1810 period. Patrick Ferguson’s breech loading flint rifle used this lock. Better American guns were stocked around such finer locks, after about 1800, when our makers could import them.
Much more complex than the large Siler lock, yet it is about the same size. Cock jaws direct sparks into the semi-waterproof pan with rain gutters. The fancy frizzen pan cover flange seals the pan. The fancy “frictionless” tumbler and sear have raised bearing rings turned around screw holes, preventing moving parts from rubbing the plate or bridle. Sometimes called a “ghosted” lock, since you can see through the frictionless parts, when viewed from above.
A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4” to 1-1/8” octagon at the breech.
Notice the “cut away” tumbler and “swing out” link, which greatly simplify lock disassembly. These are fine English innovations. This tumbler has a lower arm, made to catch the mainspring if the tumbler arm or link should break while being cocked. But even if this “weakest link” has failed, this fine lock will fire one last shot. You can depend on this nice lock, in good weather or bad, to spark well. English rifles fitted with such a fine lock invariably have a flash hole liner fitted, for fastest ignition. Refer to our reprint of Henry Nock’s Patent Breech patent drawings for details of original flash hole construction.
This frizzen is a snug fit to the pan. The lock plate is polished bright inside. Exterior parts are grit blasted to a matte gray.
We recommend that you order a dozen Flint-#ENG-6 English 3/4" gun flints, too.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
Fly detent, steel, tempered, with hole for pivot
Stirrup link, wax cast steel, tempered, integral pins
Tumbler screw, .400" head diameter, 6-40 thread
sear spring, left, die formed steel, tempered
Top jaw, wax cast steel, .64" x .87", .25" hole
Bridle & sear screw, .625" length, 6-40 thread
Frizzen spring screw, cut to .400", 6-40 thread
Frizzen screw, .840" length, inside mount, 6-40 thread for early production locks with threads under head
Frizzen roller bearing & pin, tempered steel
frizzen spring, wax cast steel, tempered, left hand
sear, left, wax cast steel, tempered use 6-40 screw
tumbler, left, wax cast steel, tempered, cut for fly, tapped 6-40
bridle, left, wax cast steel, use 6-40 screws
cock, left, wax cast steel, 1.4" throw, tapped 1/4-28
frizzen, left, wax cast steel, as cast, temper after fitting
plate, left, wax cast steel, .94" x 5.1", tapped 6-40
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
All sizes are nominal. Please verify with description for more information.
-
Brand of ManufacturerL&R Lock Company
-
Choose Flintlock or Percussion Assembled LocksFlintlock - Assembled Locks
-
Choose Lock StyleAmerican LongriflesEnglish Rifles & ShotgunsTennessee & Southern Mountain Rifles
-
Choose Right or Left Hand LockLeft Hand GunMatching Pair for both Right/Left Hand Gun
-
Lock Parts by Flintlock ModelDurs Egg - Left ( #LOCK-LR-3100 )
FLINT-ENG-6
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
LOCK-LR-1100-FX
Frizzen screw, .840" length, inside mount, 6-40 thread for early production locks with threads under head
TOOL-VISE-DX
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
page_172.pdf
Last updated: 4/25/2012 (99 KB)