This new flint lock will replace the flint lock on the Thompson Center, Hawes brand imported Hawken, or early Lyman Plains rifle. We recommend our 3/4" x 7/8" knapped English flints, #FLINT-ENG-6 for use with this lock. Overall length is 5" x 1" width. Bridle is threaded 8-32 for factory T/C lock bolt. Right hand only.
This lock has thicker stronger internal springs and parts than the Thompson Center Arms lock. It requires deepening the lock mortise slightly, a few minutes of hand work. Complete illustrated instructions are included.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
This lock has thicker stronger internal springs and parts than the Thompson Center Arms lock. It requires deepening the lock mortise slightly, a few minutes of hand work. Complete illustrated instructions are included.
FLINT-ENG-6
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
LOCK-LR-100-FL
Fly detent, steel, tempered, with hole for pivot
LOCK-LR-100-LI
Stirrup link, wax cast steel, tempered, integral pins
LOCK-LR-100-SE
Sear, wax cast steel, tempered, use 6-40 screw
LOCK-LR-100-SS
Sear spring, die formed steel, tempered
LOCK-LR-100-SSX
Sear spring screw, 6-40 thread
LOCK-LR-100-SX
Sear screw, .59" length, 6-40 thread
LOCK-LR-100-TU
Tumbler, wax cast steel, tempered, cut for fly, tapped 6-40
LOCK-LR-100-TX
Tumbler screw, .400" head diameter, 6-40 thread
LOCK-LR-900-D-CO
Cock, wax cast steel, 1.5" throw, re-inforced double throat, tapped 1/4-28 thread
LOCK-LR-900-FSX
Frizzen spring screw, 6-40 thread
LOCK-LR-900-FX
Frizzen screw, .79" length, inside mount, 6-40 thread under head, used on early 900, 03 & 05 RPL locks
LOCK-LR-900-FX-L
Frizzen screw, .8" length, inside mount threads on end, 6-40 thread, used on late 900, 03 & 05 RPL locks
LOCK-LR-900-TJ
Top jaw, wax cast steel, .64" x .87", .25" hole
LOCK-LR-900-TJX
Top jaw screw, slotted, 1.3", 1/4-28 thread
LOCK-RPL-03-BR
Bridle, wax cast steel, tempered, use 6-40 screws, fits RPL 03 &05 series
LOCK-RPL-03-F-PL
Lock plate, flint,
wax cast steel, drilled and tapped,
for L&R RPL-03 flint T/C Hawken lock
LOCK-RPL-03-FR
Frizzen,
wax cast steel, as cast, temper after fitting,
for L&R RPL-03, 05 replacement locks
LOCK-RPL-03-FS
Frizzen spring,
wax cast steel, tempered,
for L&R RPL-03 T/C Hawken lock
LOCK-RPL-03-MS
Main spring,
steel, tempered,
for L&R RPL-03 T/C Hawken lock
& L&R RPL-05 Lyman lock
Adobe Reader required to view the files below.
page_188.pdf
Last updated: 4/25/2012 (111 KB)