



Fine original flint locks were converted to percussion, during the 1825 to 1880 period. The flash hole was replaced with a powder drum and nipple, which we offer separately. Old time gunsmiths cut away the pan, discarded the frizzen, frizzen spring, and cock. A new hammer was added, and screws were peened over and filed away to fill the old holes in the plate.
This new lock avoids those problems. Simply interchange this percussion conversion John Bailes lock in your flint lock mortise.
Order our #Drum-7-5-F-N and #RST-S stainless 1/4-28 nipple.
This right hand John Bailes cap lock exactly matches our left hand John Bailes cap lock. Each can be made to interchange with our right and left hand John Bailes flint locks.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple
Fly detent, steel, tempered, with hole for pivot
Stirrup link, wax cast steel, tempered, integral pins
Tumbler screw, .400" head diameter, 6-40 thread
Bridle & sear screw, .625" length, 6-40 thread
Sear, wax cast steel, tempered, use 6-40 screw
Tumbler, wax cast steel, tempered, tapped 6-40
plate, wax cast steel, .86" x 4.7", tapped 6-40
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
- Cone length 0.440"
- Overall length: 0.635"
- Thread journal length: 0.195"
- Diameter of base: 0.307"
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
All sizes are nominal. Please verify with description for more information.
-
Brand of ManufacturerL&R Lock Company
-
Choose Flintlock or Percussion Assembled LocksPercussion - Assembled Locks
-
Choose Lock StyleAmerican LongriflesPistolTennessee & Southern Mountain Rifles
-
Choose Right or Left Hand LockMatching Pair for both Right/Left Hand GunRight Hand Gun
-
Lock Parts by Percussion ModelJohn Bailes - Right ( #LOCK-LR-1600 )
RST-S
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
TOOL-VISE-DX
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
page_114.pdf
Last updated: 4/25/2012 (102 KB)
page_173.pdf
Last updated: 4/25/2012 (104 KB)