

Best quality London made flint locks were often converted to percussion, during the 1825 - 1840 transition period. This nice percussion lock has the plate style of an earlier flint lock, with a notch for a 1/2" powder drum and nipple.
A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4” to 1-1/8” octagon at the breech.
Notice the “cut away” tumbler and “swing out” link, which greatly simplify lock disassembly. These are fine English innovations. This tumbler has a lower arm, made to catch the mainspring if the tumbler arm or link should break while being cocked. But even if this “weakest link” has failed, this fine lock will fire one last shot. You can depend on this nice lock, in good weather or bad, to spark well. English rifles fitted with such a fine lock invariably have a flash hole liner fitted, for fastest ignition. Refer to our reprint of Henry Nock’s Patent Breech patent drawings for details of original flash hole construction.
The lock plate is polished bright inside. Exterior parts are grit blasted to a matte gray.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple
Fly detent, steel, tempered, with hole for pivot
Stirrup link, wax cast steel, tempered, integral pins
Tumbler screw, .400" head diameter, 6-40 thread
sear spring, left, die formed steel, tempered
Bridle & sear screw, .625" length, 6-40 thread
sear, left, wax cast steel, tempered use 6-40 screw
tumbler, left, wax cast steel, tempered, cut for fly, tapped 6-40
bridle, left, wax cast steel, use 6-40 screws
hammer, left, wax cast steel, 1.625" throw, percussion
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
- Cone length 0.440"
- Overall length: 0.635"
- Thread journal length: 0.195"
- Diameter of base: 0.307"
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
All sizes are nominal. Please verify with description for more information.
-
Brand of ManufacturerL&R Lock Company
-
Choose Flintlock or Percussion Assembled LocksPercussion - Assembled Locks
-
Choose Lock StyleAmerican LongriflesEnglish Rifles & ShotgunsTennessee & Southern Mountain Rifles
-
Choose Right or Left Hand LockLeft Hand GunMatching Pair for both Right/Left Hand Gun
-
Lock Parts by Percussion ModelDurs Egg - Left ( #LOCK-LR-3500 )
RST-S
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
TOOL-VISE-DX
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
page_173.pdf
Last updated: 4/25/2012 (104 KB)