Colonial Pistol,
.50 caliber smoothbore, 10" barrel,
flintlock, curly maple, brass trim,
used, by Thom Frazier
Part Number: AAV-573
Availability: In Stock
Price: $1,749.00
Order Quantity:
Stocked in curly maple with a checkered grip, this Colonial flint pistol has a 10" octagon to round .50 caliber smoothbore pistol barrel. This beautiful pistol is signed T. Frazier on the top flat of the barrel and is marked No 200 on the left oblique flat. It is offered in lightly used condition. We are always delighted to show the artistic workmanship of America's contemporary gun makers.

The 10" octagon to round pistol barrel is .50 caliber smoothbore. The bore is bright and is unfired. The top flat of the barrel is signed by the maker. A small silver sight is soldered near the muzzle. No rear sight is installed on this smoothbore pistol. The barrel's exterior is finished to a bright silvery gray. The thumbnail tang is neatly engraved, along with the bolt that anchors it to the trigger plate below.

The curly maple stock is stained to a medium brown and is trimmed in brass that has been given a burnished patina finish. The grip is neatly checkered to provide a secure hold. Viewed from the bottom, the brass buttcap, triggerguard, and ramrod pipes are shown. The screw that secures the buttcap is neatly engraved. The long skirt of the ramrod entry pipe is also lightly engraved. The wooden ramrod is fitted with a flared brass loading tip. The ramrod does not have any threaded tips to accept loading or cleaning accessories. We recommend our #PL-6-50 to service this pistol. The brass sideplate has a burnished patina, to match the other brass furniture found on the pistol. Two domed lock bolts pass through to engage the lock on the opposite side.

Finished to match the barrel, the L&R John Bailes flintlock has a crisp action and a well hardened frizzen. The lock plate and cock have been lightly engraved. When using our best 5/8" knapped English gun flints, #FLINT-ENG-5, the lock will throw a shower of sparks into the pan. A stainless steel vent liner is well centered, positioned at the mid point between the bottom and top edge of the pan.

In lightly used condition, we don't see many nice hand made flint pistols very often. If your budget allows you to consider the purchase of a signed flint pistol of this quality, we recommend that you seriously consider this Colonial pistol. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $16.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable
Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable
Part Number: BORE-MOP-50-10
Availability: In Stock
Price: $3.29
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.99
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $3.19
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Part Number: FS-50-10
Availability: In Stock
Price: $4.09
Order Quantity:
Powder Horn,
large, 11 to 14",
with antique patina finish
Powder Horn, large, 11 to 14", with antique patina finish
Part Number: HORN-A-L
Availability: In Stock
Price: $74.50
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread
Part Number: JS-50-7-10
Availability: In Stock
Price: $4.59
Order Quantity:
Powder measure, brass, adjustable 0 to 50 grains, with spout
Powder measure, brass, adjustable 0 to 50 grains, with spout
Part Number: MAS-050
Availability: In Stock
Price: $19.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.59
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $4.79
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $5.79
Order Quantity:
Spring steel nipple pick,
with bone bead handle
Spring steel nipple pick, with bone bead handle
Part Number: PICK-NIPPLE
Availability: In Stock
Price: $2.99
Order Quantity:
Pistol loading rod and short starter with .50 caliber cleaning jag, 
7/16" diameter hickory rod, 10-32 threads,
12" overall usable length including .50 caliber cleaning jag
Pistol loading rod and short starter with .50 caliber cleaning jag, 7/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .50 caliber cleaning jag
Part Number: PL-7-50
Availability: In Stock
Price: $19.58
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: Out of Stock, request notification when available.
Price: $6.89
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards