English Sporting Rifle,
.58 caliber, 32" Green Mountain barrel,
maple, iron trim, percussion,
new, unfired, by J.A. Wymore
Part Number: AAV-377
Availability: In Stock
Price: $1,959.00
Order Quantity:
This slender halfstock sporting rifle is stocked in maple and trimmed in browned iron furniture with a poured pewter forend cap. The slender shaping on the maple stock combined with the 32" long straight octagon barrel give this rifle a modest weight and handy length, making it ideal to carry afield. As new, unfired, this rifle was neatly hand assembled by contemporary builder J.A. Wymore. Trigger reach is 14" to fit today's average size shooter. Weight is 8.3 pounds, and it balances just behind the rear sight.

The Green Mountain .58 caliber 32" barrel is 1" octagon. Rifled with eight equal lands and grooves with a 1 in 70" twist for a patched round ball. Green Mountain Muzzle Loading Rifle Barrels are machined from high quality American made bar stock, A.I.S.I. 1137 modified, stress relieved, annealed, certified rifle barrel quality steel. All barrels are drilled from solid stock, reamed to a high degree of smoothness, then optically checked for straightness. Very close tolerances are maintained. We recommend our .570" pure lead round ball, patched with .015" Ox-Yoke patching, lubricated with our Mink Oil tallow patch grease, if you require best accuracy. The rear sight is a semi buckhorn dovetailed 9-1/2" from the breech. The front sight is a browned steel blade dovetailed behind the muzzle.

The maple stock has a warm brown tone with a satin finish. The buttstock is fitted with a steel English style buttplate to engage the shooter's shoulder. Felt recoil should be spread over the large surface area. The wrist has a checkered panel to provide the shooter with a secure grip. The forearm is fitted with an nickel silver escutcheon plate for the barrel pin. A poured pewter forend cap protects the end grain of the stock. The rounded toe fades into the lock panels. The English style triggerguard is threaded to the trigger plate, and the rear finial is secured with a screw. The steel mounting screw has the slot neatly aligned with the barrel. The 3/8" diameter ramrod is fitted with a steel tip with 8-32 threads for loading and cleaning accessories. The single lock bolt secures the tear drop sideplate and lock to the stock. The buttstock is shaped without a cheekpiece in shotgun fashion.

The Jim Chambers Siler's Mountain percussion lock is a classic, circa 1840 - 1850 style, with rounded tail notched for a 1/2" powder drum. This caplock has been browned to a smooth brown finish. The lock has a strong mainspring, for sure-fire ignition, and fast lock time. The single trigger is pinned high to provide good leverage against the sear. The drum is fitted with a stainless steel nipple.

This halfstock longrifle is new, unfired. The large caliber rilfe has a handy length barrel, modest weight, and percusison lock mated to a single trigger. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.570" round balls, pure lead, Hornady, per 50
.570" round balls, pure lead, Hornady, per 50
Part Number: BALL-570
Availability: In Stock
Price: $12.99
Order Quantity:
.575" round balls, pure lead, hand cast, per 50
.575" round balls, pure lead, hand cast, per 50
Part Number: BALL-575-X
Availability: In Stock
Price: $17.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.19
Order Quantity:
Ball puller, steel screw, .58 caliber brass collar, 8-32 thread
Ball puller, steel screw, .58 caliber brass collar, 8-32 thread
Part Number: BP-58-8
Availability: In Stock
Price: $4.29
Order Quantity:
Bore brush, bronze, for .58 caliber, 10-32 thread
Bore brush, bronze, for .58 caliber, 10-32 thread
Part Number: BRUSH-58-10
Availability: In Stock
Price: $3.19
Order Quantity:
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash
Part Number: CAPPER-P
Availability: In Stock
Price: $12.59
Order Quantity:
Flush Nipple,
1/4-28 thread,
stainless steel, with 1/4" square shank for nipple wrench,
with tubing, fits Thompson Center
Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Part Number: FLUSH-RST
Availability: In Stock
Price: $4.99
Order Quantity:
Fouling Scraper, flat face, brass, .58 caliber, 8-32 thread
Fouling Scraper, flat face, brass, .58 caliber, 8-32 thread
Part Number: FS-58-8
Availability: In Stock
Price: $4.79
Order Quantity:
Powder Horn,
large, 11 to 14",
with antique patina finish
Powder Horn, large, 11 to 14", with antique patina finish
Part Number: HORN-A-L
Availability: Out of Stock, request notification when available.
Price: $74.50
  
Priming Horn,
small, 4 to 5",
with antique patina finish
Priming Horn, small, 4 to 5", with antique patina finish
Part Number: HORN-A-S
Availability: In Stock
Price: $62.50
Order Quantity:
Jag, jagged cleaning tip, brass, .58 caliber, 7/16" rod, 8-32 thread
Jag, jagged cleaning tip, brass, .58 caliber, 7/16" rod, 8-32 thread
Part Number: JS-58-7-8
Availability: Out of Stock, request notification when available.
Price: $5.09
  
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $20.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $7.59
Order Quantity:
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry
Part Number: OX-18-50-D
Availability: Out of Stock, request notification when available.
Price: $4.89
  
Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread
Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread
Part Number: RAMROD-7-8-B
Availability: Out of Stock, request notification when available.
Price: $19.99
  
Nipple, 1/4-28 thread, for standard rifle, 
#11 CCI cap, square shank,
hardened steel, ideal for restoration

Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration
  • Cone length: 0.440"
  • Thread journal length: 0.195"
  • Overall length: 0.635"
  • Diameter of base: 0.307"
Part Number: RST-I
Availability: In Stock
Price: $4.99
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.
Part Number: ST-8
Availability: In Stock
Price: $9.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Patch puller, corkscrew worm, steel, brass base, 8-32 thread
Part Number: WORM-CORK-8
Availability: Out of Stock, request notification when available.
Price: $6.89
  
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards