Lyman Trade Rifle, .50 caliber, 28" barrel, percussion, repaired walnut, brass trim, used, by Investarms

Home > Guns > Percussion guns > Percussion rifles

Lyman Trade Rifle,
.50 caliber, 28" barrel,
percussion, repaired walnut, brass trim,
used, by Investarms

Part Number:	AAW-351
Availability:
Price:	$459.00
Order Quantity:

Stocked in imported walnut a crack on the side panel has been repaired on this rifle. This .50 caliber percussion rifle has a 15/16" octagon 28" barrel to give it a modest weight. Trimmed in brass furniture with a large bow single trigger. This rifle was factory assembled. The lock is color case hardened in mottled colors. All brass furniture has aged to a mellow patina. The bore is bright and has been well maintained. Weighing in at 8.6 pounds the rifle has a trigger reach of 13-3/4" making it well suited for today's average size shooter.

The .50 caliber, 28" long barrel is finished to a deep blue color. The barrel is rifled with a 1 in 48" twist to shoot either patched round balls, or conical bullets. The bore is bright is and has been well maintained. The barrel is fitted with a square partridge style front sight, and semi buckhorn rear sight. All of the factory markings can be found on the top three flats of the barrel at the breech. A factory safety warning is found on the bottom left oblique flat just ahead of the nose cap. The blue barrel finish was a few light scratches from use.

The stock has been finished to a medium brown tone. The stock has a well hidden repaired crack on the side panel. The brass furniture has aged to a dark mellow patina. The beaver tail cheek piece is shaped for a right hand shooter. The wooden ramrod is fitted with a brass tip threaded to accept 10-32 cleaning and loading accessories.

The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by an oily patch. Dry and oil the exterior then reassemble the rifle.

The factory color case hardened percussion lock is in excellent condition and functions as it should. The breech is fitted with a 6-.75mm threaded nipple. Order our #RLP-S if you need a spare. The single trigger provides a smooth release of the lock and the large trigger bow allows for a gloved finger when hunting in cold weather.

Not too long, not too heavy, not too valuable to carry in the woods while stalking game, this rifle will become your favorite hunting partner. This is an ideal rifle for hunting white tail deer, mule deer, or elk, especially during specific muzzle loading seasons. This rifle has a bright well maintained bore. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20

Part Number:	BALL-50-385
Availability:
Price:	$12.29

bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20

Part Number:	BALL-50-MAXI
Availability:
Price:	$14.59
Order Quantity:

.490" round balls, pure lead, Hornady, per 100

Part Number:	BALL-490
Availability:
Price:	$16.99

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable

Part Number:	BORE-MOP-50-10
Availability:
Price:	$3.99
Order Quantity:

Ball puller, steel screw, .50 caliber brass collar, 10-32 thread

Part Number:	BP-50-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .50 caliber, 10-32 thread

Part Number:	BRUSH-50-10
Availability:
Price:	$4.29
Order Quantity:

Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash

Part Number:	CAPPER-P
Availability:
Price:	$12.59
Order Quantity:

Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread

Part Number:	JS-50-6-10
Availability:
Price:	$4.59
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Nipple Wrench for Rifles, short style, with slotted end

Part Number:	NW-160
Availability:
Price:	$9.99
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.99
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, wonder-lube

Part Number:	OX-15-50-W
Availability:
Price:	$6.39
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Ramrod for Lyman Trade Rifle, 3/8" brown Delrin nylon, 28-3/4" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.

Part Number:	RAMROD-286-LYM
Availability:
Price:	$26.99
Order Quantity:

Our Strongest Loading & Cleaning Rod, 5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken, rigid handle, 10-32 thread

Part Number:	RAMROD-C-29-10
Availability:
Price:	$31.50
Order Quantity:

Nipple, 6-.75mm metric thread, for InvestArms, Cabela's Hawken rifles, #11 CCI cap, stainless steel

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RLP-S
Availability:
Price:	$5.99
Order Quantity:

Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.

Part Number:	ST-7
Availability:
Price:	$9.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Percussion guns > Percussion rifles