Rear Sight, with aperture ring, for 13/16" or 7/8" barrels wax cast steel This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 13/16" or 7/8" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast,       RS-CA-PEEP-14 . . . $8.99

Rear Sight, with aperture ring, for 15/16" or 1" barrels wax cast steel This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 15/16" or 1" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast, an       RS-CA-PEEP-16 . . . $8.99

Rear sight, Tall Pennsylvania style for 13/16" or 7/8" octagon barrels, wax cast steel This small version is made for a longrifle with a slim 13/16" or 7/8" octagon barrel. Wax cast steel, this sight has a long base similar to our other Pennsylvania sight #RS-FG-14. However this sight height from the bottom of the dovetail to the top of the sight notch is 0.43", to allow sight-in with a tall front sight, and to reduce mirage and heat       RS-FG-14-T . . . $8.99

Rear sight, Tall Pennsylvania style for 15/16" or 1" octagon barrels, wax cast steel This larger version is made for a longrifle with a 15/16" or 1" octagon barrel. Wax cast steel, this sight has a long base similar to our other Pennsylvania sight #RS-FG-16. However this sight height from the bottom of the dovetail to the top of the sight notch is 0.43", to allow sight-in with a tall front sight, and to reduce mirage and heat glare       RS-FG-16-T . . . $8.99

Beach's Front Sight , rotates between globe and blade, steel base, by Davide Pedersoli & Co. This replica of Beach's front sight copies the post Civil War front sight found on many fine single shot and lever action rifles. The blued steel base has a .379" dovetail, .082" deep, .670" wide. The brass leaf cams over a spring, forward to show an open sight post, back to show a globe with pin head bead. Imported from Italy. The blade sight will       FS-DP-BEACH . . . $110.00

Globe Front Sight , with 12 inserts, by Davide Pedersoli & Co. Made in Italy, by Davide Pedersoli, the dovetail base is slightly larger than a 3/8" standard dovetail for a snug fit. It will not fit the larger 7/16" slots on Shiloh, C. Sharps, or antique Sharps rifle dovetails. The .375" dovetail base is .080" deep, .650" wide, with a direction mark on the underside to ease installation. The center of the sight       FS-SHARPS-1 . . . $73.59

Creedmoor Vernier Tang Sight , for Mid Range competition, with 3" elevation, and windage adjustment This mid-range 3" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 4-.7mm moun       RS-CREED-3-E . . . $87.99

Rear sight, H.E. Leman semi-buckhorn for 15/16", or 1" octagon barrel, wax cast steel Wax cast steel, not polished, this sight is a reproduction of those found on H.E. Leman trade rifles. This sight is suitable for a long rifle with a 15/16", or 1" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., doveta       RS-HL-16 . . . $8.99

Rear sight, Jaeger high blade, wax cast steel Wax cast steel, not polished, this sight is available with 2 different heights of sight. This sight is smaller than most Jaeger sights, which makes it suitable for smaller octagon barrels. Undercut base is .475" long, .590" wide, .062" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.46".       RS-JAEG-H . . . $10.99

Rear sight, Jaeger low blade, wax cast steel Wax cast steel, not polished, this sight is available with 2 different heights of sight. This sight is smaller than most Jaeger sights, which makes it suitable for smaller octagon barrels. Undercut base is .460" long, .600" wide, .062" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.32".       RS-JAEG-L . . . $10.99

Fine Blade Front Sight , milled brass Similar to early military flint rifle sights, this is a "barley-corn" style front sight. The base is .370" long, only .550" wide, .050" deep. The blade stands .150" above the base, and measures .093" wide. Military rifles generally have iron front sights, while most civilian rifles have brass front sights.       FS-PA-253-B . . . $11.59

Fine Blade Front Sight , milled steel Similar to early military flint rifle sights, this is a "barley-corn" style front sight. The base is .375" long, only .550" wide, .062" deep. The blade stands .150" above the base, and measures .096" wide. Military rifles generally have iron front sights, while most civilian rifles have brass front sights.       FS-PA-253-I . . . $9.79

Gunsmithing Labor : install soldered part, sight or lug, per operation Round barrels sometimes require soldered lugs or sights. Thin walled barrels often require soldered lugs or sights. Prompt service : Our gunsmith will install our underlug using solder, for standard (halfstock size) wedge key, small (fullstock size) wedge key, or for a round steel dowel pin. Shop time typically requires 7 to 10 days for labor. Un       LABOR-US . . . $25.00

Creedmoor Vernier Tang Sight , for Mid Range competition, with 3" elevation and windage, plus true Vertical alignment This mid-range 3" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to sc       RS-CREED-3-WE . . . $105.99

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation, and windage adjustment This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun       RS-CREED-5-E . . . $105.99

Rear sight , with extra long base, wax cast steel Wax cast steel, not polished, cut this extra long sight base sight to fit nearly any old dovetail. Cut this sight to fit your rifle, do not enlarge the dovetail slot in your barrel. Made in the U.S.A., the dovetail is about 1.250” length, and the base is .510” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.33".       RS-DRU-LCT . . . $8.99

Rear sight, low long base longrifle style for 13/16" or 7/8" barrels, wax cast steel Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .535" wide for use on a 13/16" or 7/8" barrel. Dovetail to a depth of .050". Height from       RS-LLB-14 . . . $8.99

Rear sight, low long base longrifle style for 15/16" or 1" barrels, wax cast steel Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .575" wide for use on a 15/16" or 1" barrel. Dovetail to a depth of .050". Height from t       RS-LLB-16 . . . $8.99

Rear sight, large Hawken style, wax cast steel Wax cast steel, this rear sight has a long base to fit a slot .730" long, .590" wide and .050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.37". Easily shortened, this larger sight looks right on a big plains rifle with a 15/16" or 1" octagon barrel. Made in the U.S.A. This semi-buckhorn sight is one of our favori       RS-PA-11 . . . $8.99

Rear sight, semi-buckhorn style for 13/16", or 7/8" octagon barrel, wax cast steel Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 13/16", or 7/8" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .380" long, and       RS-SB1-14 . . . $8.99

Rear sight, semi-buckhorn style for 15/16", or 1" octagon barrel, wax cast steel Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 15/16", or 1" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .375" long, and .5       RS-SB1-16 . . . $8.99

Tang sight, Lyman No. 2 for Model 1886 Winchester Rifles , fits the original Winchesters (without tang safety), and Browning replicas with 2.190" hole spacing. William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Winchester 1886 lever action rifle, fits the original Winchester (without tang safety), and Browning replicas with 2.190" hole spacing. Note: This tang sight will not fit pistol grip models, or moder       RS-WIN-86 . . . $112.99

Target Front Sight Blank , brass base The California style front sight, made for target shooting, it gives a square post sight picture. The base has a .375" dovetail, about .750" wide. The base is 0.120" thick to be fitted into a .062 to 0.093' deep dovetail (do not dovetail full depth). The .065" thick blade is .365" tall. Shorten the blade to sight-in, as needed. Same day shipment, w       FS-CA-1B . . . $11.59

Target Front Sight Blank , steel base The California style front sight, made for target shooting, it gives a square post sight picture. The base has a .375" dovetail, about .750" wide. The base is 0.120" thick to be fitted into a .062 to 0.093' deep dovetail (do not dovetail full depth). The .065" thick blade is .365" tall. Shorten the blade to sight-in, as needed. Same day shipment, w       FS-CA-1I . . . $9.79

Front Sight , high blade, .062" thick nickel silver, 9mm by 3/32" brass dovetail base for CVA rifles This front sight has a polished nickel silver blade with brass base. The rounded silver blade is .270" tall by 0.062" wide. The machined brass dovetail base is .355" long, .750" wide, and .093" deep for fitting to CVA brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail s       FS-CVA-60-HB . . . $11.59

has been added to your .

---