Stock, Thompson Center halfstock , pre shaped, pre-inlet, 15/16" barrel, Thompson Center lock, fancy maple Our halfstock for your T/C Hawken rifle or kit is cut for for the standard 15/16” barrel found on .45 or .50 caliber factory assembled Thompson Center Hawken Rifles. In addition to the barrel, the tang, lock, double set triggers, and oval inlays are pre-inlet. This extra long stock may be cut to fit your buttplate, or select one of our steel buttpl       STK-TCH-15-M3 . . . $249.00

Cap Box, 1-3/4" diameter, embossed with "fleur-de-lis" engraving, polished brass, made in the U.S.A. This little container is made of polished brass, with a slightly domed lid that snugly fits the base. The domed lid is embossed with the popular "fleur de lis" emblem (also called the French Royal device. A quality accessory, display it with your cased revolver or percussion pistol. Nearly 1-3/4" diameter, just over 1/2" deep, this fancy little box       CAP-BOX-B-FDL . . . $10.95

Cap box, 1-3/4" diameter, embossed "fleur-de-lis" engraving, polished nickel silver, made in the U.S.A. This little container is made of polished nickel silver, with a slightly domed lid that snugly fits the base. The domed lid is embossed with the popular "fleur de lis" emblem (also called the French Royal device. A quality accessory, display it with your cased revolver or percussion pistol. Nearly 1-3/4" diameter, just over 1/2" deep, this fancy li       CAP-BOX-S-FDL . . . $13.95

Nipple primer , brass, for percussion guns This tiny flask dispenses priming powder directly into the nipple, to clear a mis-fire. It must be filled with very finely granulated black powder. This small flask is 3-5/16" long with a 1/2" diameter. If you do not have FFFFg priming powder available, place one-half teaspoon of FFg or FFFg into a saucer. Press the spoon with your thumb, and gentl       PRIMER-B . . . $13.99

1858 Remington New Model Army Revolver , .44 caliber, 8" barrel, percussion, blued, walnut, new, in factory box, by Aldo Uberti This nice 1858 Remington New Model Army revolver is finished to a deep blue with polished brass triggerguard. The revolver is offered as new in the factory box with the paperwork. The walnut grips have a medium gloss varnish. This .44 caliber steel frame revolver will give years of reliable service. It was manufactured by Aldo Uberti & Co. of Italy       AAW-599 . . .

T/C Drop-in Barrel Assembly , .54 caliber, 1-66" twist, 15/16" octagon, 32" length, blued, 5.2 lb, percussion, for Thompson Center Hawken Rifle. Thompson Center drop-in barrel , .54 caliber with 1-66" twist for a patched round ball. 15/16" octagon by 32" length. Percussion ignition for Thompson Center Hawken rifles. The barrel, plug, adjustable rear sight, bead front sight, rib, rod pipes, and underlug are blued. Weight is 5.2 pounds. Fully assembled at the Green Mountain Barrel Company fa       GMT-54-C-TC-32-B . . . $359.00

Classic Tennessee , pre shaped, pre-inlet stock, 13/16" octagon, 42" barrel, large Siler lock Our classic Tennessee fullstock has a buttstock with a straight comb, unlike our earlier stocks, a bit thicker than the very thin late Tennessee stocks. This stock will look great, when trimmed in iron. Pre-inlet for our slim 13/16" octagon 42" barrel, large Siler flint or percussion lock, our TR-DST-4 or 6 triggers, a straight tang plug, and drill

Stock, Classic Tennessee , pre-inlet large Siler lock, 13/16" octagon, 42" barrel, plain maple Our classic Tennessee fullstock has a buttstock with a straight comb, unlike our earlier stocks, a bit thicker than the very thin late Tennessee stocks. This stock will look great, when trimmed in iron. Pre-inlet for our slim 13/16" octagon 42" barrel, large Siler flint or percussion lock, our TR-DST-4 or 6 triggers, a straight tang plug, and drill       STK-CTI-13-M1 . . . $240.00

Stock, Classic Tennessee , pre-inlet large Siler lock, 13/16" octagon, 42" barrel, semi-fancy maple Our classic Tennessee fullstock has a buttstock with a straight comb, unlike our earlier stocks, a bit thicker than the very thin late Tennessee stocks. This stock will look great, when trimmed in iron. Pre-inlet for our slim 13/16" octagon 42" barrel, large Siler flint or percussion lock, our TR-DST-4 or 6 triggers, a straight tang plug, and drill       STK-CTI-13-M2 . . . $269.00

Stock, Classic Tennessee , pre-inlet large Siler lock, 13/16" octagon, 42" barrel, fancy maple Our classic Tennessee fullstock has a buttstock with a straight comb, unlike our earlier stocks, a bit thicker than the very thin late Tennessee stocks. This stock will look great, when trimmed in iron. Pre-inlet for our slim 13/16" octagon 42" barrel, large Siler flint or percussion lock, our TR-DST-4 or 6 triggers, a straight tang plug, and drill       STK-CTI-13-M3 . . . $329.00

Stock, Classic Tennessee , pre-inlet large Siler lock, 13/16" octagon, 42" barrel, extra fancy maple Our classic Tennessee fullstock has a buttstock with a straight comb, unlike our earlier stocks, a bit thicker than the very thin late Tennessee stocks. This stock will look great, when trimmed in iron. Pre-inlet for our slim 13/16" octagon 42" barrel, large Siler flint or percussion lock, our TR-DST-4 or 6 triggers, a straight tang plug, and drill       STK-CTI-13-M4 . . . $399.00

1858 Remington New Model Navy Revolver , .36 caliber, 7-3/8" barrel, percussion, blued, walnut, new, in factory box, by Aldo Uberti This nice 1858 Remington New Model Army revolver in .36 Navy caliber is finished to a deep blue with polished brass triggerguard. The revolver is offered as new in the factory box with the paperwork. The walnut grips have a medium gloss varnish. This .36 caliber steel frame revolver will give years of reliable service. It was manufactured by Aldo U       AAW-600 . . . $449.00

Halfstock Plains Rifle , .50 caliber, 35" barrel, percussion, maple, iron, brass, nickel, used, by P. Sheets This percussion halfstock plains style rifle is stocked in maple, and trimmed in a mixture of brass, iron, and nickel silver furniture, and features a .50 caliber barrel. The rifle is offered in used condition, with a well maintained bore. Weight is 7.8 pounds and the rifle has a trigger reach of 13-5/8" making it well suited for today's average si       AAW-527 . . .

Western Holster, right hand, black leather, 8" barrel, for percussion Army and Navy revolvers Our Western holster has a cut away top for 'guard. 44 Army and .36 Navy revolvers with up to 8" barrel. Neatly stitched with finished edges, the front strap reinforces the belt loop. Use on any belt up to 4-1/2" width. When worn on the right, the pistol butt faces to the rear. These holsters are a bargain, and they will give good service. Made in t       HOLSTER-WB-R . . . $33.99

Sideplate for a Tennessee longrifle , iron Tennessee rifles date from the late flint period, through the percussion period. Often trimmed in iron, sometimes in brass, these rifles usually feature fine imported locks, double set triggers and figured curly maple stocks. Many have primitive hand forged furniture and long tangs. Poor boy style rifles may omit the buttplate, entry pipe and muzzl       SP-TN-1-I . . . $6.99

Sideplate for a Tennessee Longrifle , iron Tennessee rifles date from the late flint period, through the percussion period. Often trimmed in iron, sometimes in brass, these rifles usually feature fine imported locks, double set triggers and figured curly maple stocks. Many have primitive hand forged furniture and long tangs. Poor boy style rifles may omit the buttplate, entry pipe and muzzl       SP-TN-2-I . . . $6.99

Sideplate for a Tennessee Longrifle , brass Tennessee rifles date from the late flint period, through the percussion period. Often trimmed in iron, sometimes in brass, these rifles usually feature fine imported locks, double set triggers and figured curly maple stocks. Many have primitive hand forged furniture and long tangs. Poor boy style rifles may omit the buttplate, entry pipe and muzzl       SP-TN-3-B . . . $6.99 Closeout

Sideplate for a Tennessee Longrifle , iron Tennessee rifles date from the late flint period, through the percussion period. Often trimmed in iron, sometimes in brass, these rifles usually feature fine imported locks, double set triggers and figured curly maple stocks. Many have primitive hand forged furniture and long tangs. Poor boy style rifles may omit the buttplate, entry pipe and muzzl       SP-TN-3-I . . . $6.99

Stock, John Bivins , pre-inlet, large Siler lock, "B" profile 42" swamped barrel, plain maple Our John Bivins' 1770 Lancaster inlet for a Golden Age "B" profile 42" swamped barrel, with mortise for large Siler right hand flint or percussion lock. Shaped from the lock panels back the stock is shaped with a square cheek piece. The forend is square ahead of the lock panels, to allow for easy bench vise mounting. Inlet for our large Bivins' b       STK-GA-B-M1 . . . $275.00

Stock, John Bivins , pre-inlet, large Siler lock, "B" profile 42" swamped barrel, fancy maple Our John Bivins' 1770 Lancaster inlet for a Golden Age "B" profile 42" swamped barrel, with mortise for large Siler right hand flint or percussion lock. Shaped from the lock panels back the stock is shaped with a square cheek piece. The forend is square ahead of the lock panels, to allow for easy bench vise mounting. Inlet for our large Bivins' b       STK-GA-B-M3 . . . $339.00

Stock, John Bivins , pre-inlet, large Siler lock, "B" profile 42" swamped barrel, extra fancy maple Our John Bivins' 1770 Lancaster inlet for a Golden Age "B" profile 42" swamped barrel, with mortise for large Siler right hand flint or percussion lock. Shaped from the lock panels back the stock is shaped with a square cheek piece. The forend is square ahead of the lock panels, to allow for easy bench vise mounting. Inlet for our large Bivins' b       STK-GA-B-M4 . . . $399.00

Stock, John Bivins , pre-inlet, large Siler lock, "C" profile 42" swamped barrel, plain maple Our John Bivins' 1770 Lancaster inlet for a Golden Age "C" profile 42" swamped barrel, with mortise for large Siler right hand flint or percussion lock. Shaped from the lock panels back the stock is shaped with a square cheek piece. The forend is square ahead of the lock panels, to allow for easy bench vise mounting. Inlet for our large Bivins' b       STK-GA-C-M1 . . . $275.00

Stock, John Bivins , pre-inlet, large Siler lock, "C" profile 42" swamped barrel, fancy maple Our John Bivins' 1770 Lancaster inlet for a Golden Age "C" profile 42" swamped barrel, with mortise for large Siler right hand flint or percussion lock. Shaped from the lock panels back the stock is shaped with a square cheek piece. The forend is square ahead of the lock panels, to allow for easy bench vise mounting. Inlet for our large Bivins' b       STK-GA-C-M3 . . . $339.00

Stock, John Bivins , pre-inlet, large Siler lock, "C" profile 42" swamped barrel, extra fancy maple Our John Bivins' 1770 Lancaster inlet for a Golden Age "C" profile 42" swamped barrel, with mortise for large Siler right hand flint or percussion lock. Shaped from the lock panels back the stock is shaped with a square cheek piece. The forend is square ahead of the lock panels, to allow for easy bench vise mounting. Inlet for our large Bivins' b       STK-GA-C-M4 . . . $399.00

John Bivins , 1770 Lancaster County pre shaped stock, pre-inlet, "B", or "C" profile 42" swamped barrel, large Siler lock Our John Bivins' 1770 Lancaster inlet for a Golden Age "B", or, "C" profile 42" swamped barrel, with mortise for large Siler right hand flint or percussion lock. Shaped from the lock panels back the stock is shaped with a square cheek piece. The forend is square ahead of the lock panels, to allow for easy bench vise mounting. Inlet for our large

has been added to your .

---