This model will replace the small Spanish Maslin percussion lock, and the similar locks by Russ Hamm, CVA, Traditions, Cochran, and Armsport. The rear of the lockplate has a pre-indicated marking for trimming to the round tail versions of these locks.
Overall length is 4-1/2" x 7/8" width. Right hand only.
This lock has thicker stronger internal springs and parts than the Connecticut Valley Arms lock. It requires deepening the lock mortise slightly, a few minutes of hand work. Complete illustrated instructions are included.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Overall length is 4-1/2" x 7/8" width. Right hand only.
This lock has thicker stronger internal springs and parts than the Connecticut Valley Arms lock. It requires deepening the lock mortise slightly, a few minutes of hand work. Complete illustrated instructions are included.
LOCK-LR-100-BX
Bridle screw, 6-40 thread
LOCK-LR-100-FL
Fly detent, steel, tempered, with hole for pivot
LOCK-LR-100-SS
Sear spring, die formed steel, tempered
LOCK-LR-100-SSX
Sear spring screw, 6-40 thread
LOCK-LR-100-SX
Sear screw, .59" length, 6-40 thread
LOCK-LR-100-TX
Tumbler screw, .400" head diameter, 6-40 thread
LOCK-RPL-01-BR
Bridle, wax cast steel, use 6-40 screws, fits RPL 01, 02, & 04 series
LOCK-RPL-01-MS
Main spring,
forged steel, tempered,
for L&R RPL-01, 02, 04, 07 lock
LOCK-RPL-01-SE
Sear,
wax cast steel, drilled and tempered,
for L&R RPL-01 Maslin lock, RPL-04 Tennessee lock.
LOCK-RPL-01-TU
Tumbler,
wax cast steel, drilled and tempered,
for L&R RPL-01 Maslin lock, RPL-02 Hawken lock, RPL-04 Tennessee
Adobe Reader required to view the files below.
page_188.pdf
Last updated: 4/25/2012 (111 KB)