This flint lock will replace the large flint lock on the CVA or Traditions Hawken Rifle, from Spain. Overall length 4.98” x 0.98” width.
Right hand only. NOTE: this lock wll NOT fit the Traditions Woodsman or Traditions St. Louis Hawken. See the No. 7 RPL lock for those rifles.
This lock has thicker stronger internal springs and parts than the Connecticut Valley Arms lock. It requires deepening the lock mortise slightly, a few minutes of hand work. Complete illustrated instructions are included.
We recommend that you order a dozen #FLINT-ENG-6 English 3/4" gun flints, too.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Right hand only. NOTE: this lock wll NOT fit the Traditions Woodsman or Traditions St. Louis Hawken. See the No. 7 RPL lock for those rifles.
This lock has thicker stronger internal springs and parts than the Connecticut Valley Arms lock. It requires deepening the lock mortise slightly, a few minutes of hand work. Complete illustrated instructions are included.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
English gun flint, 5/8 x 3/4", small Siler, L&R Bailes, CVA, all Thompson Center flintlocks, Lyman Great Plains & Trade Rifles, Pedersoli LePage pistol. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
FLINT-ENG-5
English gun flint, 5/8 x 3/4", small Siler, L&R Bailes, CVA, all Thompson Center flintlocks, Lyman Great Plains & Trade Rifles, Pedersoli LePage pistol. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
LOCK-LR-100-BX
Bridle screw, 6-40 thread
LOCK-LR-100-FL
Fly detent, steel, tempered, with hole for pivot
LOCK-LR-100-SS
Sear spring, die formed steel, tempered
LOCK-LR-100-SSX
Sear spring screw, 6-40 thread
LOCK-LR-100-SX
Sear screw, .59" length, 6-40 thread
LOCK-LR-100-TX
Tumbler screw, .400" head diameter, 6-40 thread
LOCK-LR-900-FSX
Frizzen spring screw, 6-40 thread
LOCK-LR-900-TJX
Top jaw screw, slotted, 1.3", 1/4-28 thread
LOCK-RPL-01-BR
Bridle, wax cast steel, use 6-40 screws, fits RPL 01, 02, & 04 series
LOCK-RPL-01-FR
Frizzen,
wax cast steel, as cast, temper after fitting,
for L&R RPL-01 to 05, & 07 replacement locks
LOCK-RPL-01-FS
Frizzen spring,
wax cast steel, tempered,
for L&R RPL-01 to 05, & 07 locks
LOCK-RPL-01-MS
Main spring,
forged steel, tempered,
for L&R RPL-01, 02, 04, 07 lock
LOCK-RPL-01-TU
Tumbler,
wax cast steel, drilled and tempered,
for L&R RPL-01 Maslin lock, RPL-02 Hawken lock, RPL-04 Tennessee
LOCK-RPL-02-SE
Sear,
wax cast steel, drilled and tempered,
for L&R RPL-02 CVA Hawken lock
Adobe Reader required to view the files below.
page_188.pdf
Last updated: 4/25/2012 (111 KB)