

L&R's Late English Flint Lock is sometimes called a “Hawken" flint lock. Use it on American longrifles of the 1800 to 1830 era, fullstock Plains rifles, Hawken rifles, Tennessee rifles, English fowling guns and London style flint fullstock and half-stock sporting rifles.
This nice right flint lock is made to fit our right hand Hawken fullstock pre-inlet stock. Formerly called the Manton lock, it should not be confused with the smaller #LOCK-LR-1700 Manton flint lock.
This lock has a water-proof pan, roller bearing frizzen spring, stirrup link, stiff mainspring, and fly detent to allow the use of a set trigger. Turned raised bearing rings on the tumbler and sear minimize friction.
We recommend that you order a dozen #Flint-ENG-6 English 3/4" gun flints, too.
This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
Bridle, wax cast steel, tempered, use 6-40 screws
Fly detent, steel, tempered, with hole for pivot
Stirrup link, wax cast steel, tempered, integral pins
Sear, wax cast steel, tempered, use 6-40 screw
Tumbler, wax cast steel, tempered, cut for fly, tapped 6-40
Tumbler screw, .400" head diameter, 6-40 thread
Cock, wax cast steel, 1.5" throw, gooseneck style, tapped 1/4-28 thread
Cock, wax cast steel, 1.5" throw, re-inforced double throat, tapped 1/4-28 thread
Frizzen, right, wax cast steel, as cast, temper after fitting
Frizzen spring, wax cast steel, tempered, cut for roller & pin
Frizzen screw, .79" length, inside mount, 6-40 thread under head, used on early 900, 03 & 05 RPL locks
Frizzen screw, .8" length, inside mount threads on end, 6-40 thread, used on late 900, 03 & 05 RPL locks
Lock plate, right, wax cast steel, 5.0" x 1.0", tapped 6-40
Frizzen roller bearing & pin, .28" diameter, tempered
Top jaw, wax cast steel, .64" x .87", .25" hole
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
All sizes are nominal. Please verify with description for more information.
-
Brand of ManufacturerL&R Lock Company
-
Choose Flintlock or Percussion Assembled LocksFlintlock - Assembled Locks
-
Choose Lock StyleEnglish Rifles & ShotgunsHawken & Plains RiflesTennessee & Southern Mountain Rifles
-
Choose Right or Left Hand LockMatching Pair for both Right/Left Hand GunRight Hand Gun
-
Lock Parts by Flintlock ModelLate English - Right ( #LOCK-LR-900 ) ( #LOCK-LR-900-D )
FLINT-ENG-6
English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
LOCK-LR-900-D-CO
Cock, wax cast steel, 1.5" throw, re-inforced double throat, tapped 1/4-28 thread
LOCK-LR-900-FX
Frizzen screw, .79" length, inside mount, 6-40 thread under head, used on early 900, 03 & 05 RPL locks
LOCK-LR-900-FX-L
Frizzen screw, .8" length, inside mount threads on end, 6-40 thread, used on late 900, 03 & 05 RPL locks
TOOL-VISE-DX
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
page_138.pdf
Last updated: 4/25/2012 (107 KB)
page_139.pdf
Last updated: 4/25/2012 (111 KB)
page_180.pdf
Last updated: 4/25/2012 (104 KB)
page_181.pdf
Last updated: 4/25/2012 (109 KB)
page_221.pdf
Last updated: 4/25/2012 (131 KB)